Category Archives for "How to"

weed eater head won't come off

What to Do When the Weed Eater Head Won’t Come Off

How to , Weed Eater Tips & Tricks , Weed Eaters

If you’ve been struggling with getting the head off of your weed eater, don’t worry, you’re not alone.

Being a frequent gardener or just keeping up with lawn maintenance can cause a number of issues, including problems with equipment.

Luckily, we’ve gone through and survive plenty of these issues, especially with a weed eater.

Using the most recent model of weed eater means that there can be two main reasons that the head won’t come off.

First, the head could either be designed as a bump knob, or it could be a screw-off lid.

Either way, we will teach you how to remove it if the weed eater head won’t come off.

Replacing a Weed Eater Head

To safely remove the head of the weed eater, you’re going to need a specific set of tools.

Each weed eater device will have different types of attachments.

Looking at the device can help determine what tools you’ll need.

If not, you can determine the necessary tools by looking at the manufacturer's manual.

Here’s a simplified list of the possible tools you’ll need to use:

  • Weed eater replacement head
  • A spool of nylon string (preferably 0.085 in diameter)
  • Towel or cloth
  • Screwdrivers of varying sizes
  • Wrenches of varying sizes
  • Oil and gas

Step 1: Inspect the Attachment Type

The very first method for identifying the problem is going to be assessing the type of weed eater connection.

Some older models of weed eaters don’t come with additional head attachments, which may be why you’re struggling to get them off.

These types often are built-in to the machine, and you can tell if yours have one if the head and main body have a small gap.

There are two main types you’ll run into:

Knob Head

This is located at the base of the attachment and will be a relatively small bump.

This bump is attached to the main body of the weed eater and allows the device to extend.

Knob heads are popular with electrical and gas weed eaters.

To remove it, you will need to press down on the head after the device is powered off, and it should pop off.

Screw Head

This can be identified if the head and the main body of the weed eater is aligned closely together.

Generally, this type will have no gaps between the attachment and weed eater.

To remove this, power off the device and grasp firmly on the head.

From there, rotate it in a counterclockwise motion until it comes off.

Step 2: Turn off the Main Power

Once you’ve assessed the connection type, it will be time to begin removing the weed eater head from the main body.

Just with any electrical device, you’re going to want to switch the power off so that the engine is completely turned off.

To ensure that it won’t start up again, locate the power button, and power the device off.

If you can hear the engine rumbling, then it’s likely still turning off.

Taking the plug out can ensure that the device doesn’t accidentally switch on.

Once it’s been powered off and had time to cool, you can lay it down on a flat surface and begin to remove the head.

Step 3: Clean the Device

If you’ve already used the device, then it may be a good idea to remove any of the grime before you attempt to get the head off.

Dirt and build-up of mud, leaves, and other particles may cause the head to become jammed.

By cleaning it off, you’ll have an easier time removing it and also be able to get a good grip on the device.

The best method to clean a weed eater head is by using a durable towel.

Start by dipping the cloth in water and wiping down the device.

Dip the towel back into the water to remove any dirt and continue to wipe the machine down.

Once the trimmer head is free from grass clippings and dirt, you can move onto the next step.

Step 4. Start by Removing Spool

Many weed eater heads have a spool of line that loops around the housing of the head.

To remove the head, you’re going first to have to remove this spool.

It can be a bit complicated at first, but after pushing the line in and twisting, you will be able to get the spool loose.

Once it starts to loosen, pull the spool out carefully.

Depending on what brand the weed eater is and if the device already came with a spool, the head may have an odd shape.

If you’re struggling to remove the spool, we highly suggest using the instruction manual.

On the off case that you don’t have the instruction manual, then you may want to contact the manufacturer for further details.

We understand how hard it can be to remove a stuck head.

The last thing you want to do is attempt to rip out the spool if it's clogged; you can end up damaging the device permanently.

This is the reason why we recommend contacting the manufacturer if the spooler gets stuck.

Step 5: If There’s No Spool, Look for Remaining Nuts and Bolts

Standard models of weed eaters sometimes come without spools.

If this is the case, you’re going to want to identify the retaining nuts and bolts.

These small screws are what attach the head of the device to the main body.

To remove them, unscrew them and then pull off the head.

It can be challenging to locate these nuts and bolts because they are small.

To ensure that you’re removing the right ones, try and find the ones that directly attach the head to the main body.

Use the proper size and screws to remove them so that you don’t strip or damage them.

If you’re still struggling to get the head off even after removing the screws, you may want to consider two options: either the head is stuck and needs to be oiled, or the device may be reverse-threaded.

Step 6: Remove the Head of Your Weed Eater

Once you’ve got the spool and nuts and bolts out, you can easily pull off the head of your weed eater.

Start by positioning both of your hands at the base and head of the weed eater.

Softly pull the head from the base until the unit pops off.

If it jams, try and use a cordless screwdriver to loosen the ends.

This can help pry heads from the weed eater if it’s stuck on the main body.

However, take special care not to be too rough; otherwise, the unit may crack.

Step 7: Clean out the Inside

Once you have the head off, it’s a good idea to go into the weed eater and clean it off.

The head attachment will need to be cleaned if you’re going to reuse it.

Inspect the inside and see if it’s in good condition, and throw away the head if it contains any cracks, rust, or damaged parts.

If not, take the head out and clean the inside with a towel.

Be careful of any sharp edges and use gloves.

Once you have the insides cleaned out, you can place it back onto the main body.

To replace the current head with a new one, purchase a separate head from the corresponding brand.

Ensure that you have the proper model, as not all weed eater heads will fit on the main body of the device.

Once you’ve got the right one, you can begin to reattach the head.

Step 8: Replace the Spool and String

Start by inserting the two ends of the line spool from the device.

The holes on the outside of the head should safely secure the spool in place.

You’re going to want to place at least three inches of spool out of each end.

From there, you can tighten the bottom bump knob or screw on a new head.

Step 9: Replace the Weed Eater Head

Just as you detached the head, reattach it following the opposite steps.

Insert the head of the weed eater, and either screw or screw-drive it back into place.

Always test the device after you’ve reattached the head.

Try and shake the device a bit and see if the head stays in place.

Once it has, you can power it on and see if it works.

If the weed eater head operates without issues, then you can continue to use the device as normal.

On the off chance that the unit doesn’t function normally, then you’ll need to try and find where the issue is.

weed eater head won't come off

Weed Eater Head Won’t Come Off: What to Do

If you hit a roadblock while loosening the weed eater head, then we can help you.

There’s a number of issues we commonly see among gardeners reattaching weed eater heads.

Here’s a quick list of the most frequent problems;

Having the Wrong Head Replacement Type

We see plenty of people assume that all weed eaters are the same.

Generally, this is true, but each head is made to work with a specific weed eater body.

If you’re struggling to get the head back on, it could be because you’ve purchased the same brand but not a compatible head type.

Having an Older Model That’s Stuck

Sometimes, it will be impossible to get the head off of the weed eater.

Many old versions of weed eaters are only designed to have one purpose.

If the head isn’t coming off, it could be that the head isn’t designed to come off.

Aside from that, the head of the weed eater can get permanently stuck.

If you’re not cleaning your device regularly or it’s been sitting in a shed for a while, the head may not come off easily.

If this is the case, you may need to get rid of the entire device and replace it.

However, if you find that the unit is stuck, you can attempt to clean it off.

Cleaning the head and the connection can help remove dirt and grime.

This, in turn, will allow the unit to loosen and possibly help the head attachment from coming off.

Using the Wrong Tools

The last issue we find that’s pretty common is that you could be using the wrong type of screwdriver.

Chipping the screws or damaging the indents can result in the head becoming stuck.

If you’re using screwdrivers to remove nuts and bolts, ensure that you have the right size.

One way to avoid this issue is to invest in a decent tool kit.

We recommend using hand screwdrivers for the removal process.

The reason for this is that electrical power screwdrivers may be too forceful and might chip away at the exterior of the head.

If the weed eater’s head is made from plastic or fragile material, it could become permanently damaged due to unscrewing at such a high speed.

Warnings

Replacing a weed eater head isn’t a complicated process, but it does pose a risk.

Before you begin, always take the necessary safety procedures to ensure that you won’t get injured.

The weed eater is a powerful device and still needs to be powered off before taking it apart.

If you’re struggling to replace the device’s head, then we don’t recommend doing it yourself.

Instead, ask someone with experience to help you.

Weed eaters can be extremely dangerous to you and the people around you; the last thing you want is to get injured or break your device accidentally.

Struggling to replace the head is normal, but don’t get carried away.

Reading step-by-step guides, such as this one, can help you stay safe and on track.

Most weed eaters will have a similar head removing process, but some are designed uniquely.

If you don’t have access to the manual, consider contacting the company for further instructions.

Conclusion

Removing a weed eater doesn’t have to be super complicated.

If you’ve taken the necessary steps to learn what to do when the weed eater head won’t come off, you’ll find that the process will become much more manageable.

We understand that it can get frustrating at times, which is why it’s essential to learn the steps ahead of time.

We hope that we’ve at least helped you understand how to loosen the head off a weed eater.

how to string a echo weed eater

How to String a Echo Weed Eater

How to , Weed Eater Tips & Tricks , Weed Eaters

Learning how to string a Echo weed eater can be challenging if you’ve never attempted it before.

Weed eaters come in various shapes, sizes, and models, and it can be frustrating to replace the string if you don’t know the step-by-step process that’s required for your specific model.

Aside from that, the Echo Weed Eater is designed in a way that’s unique to other modern weed eaters.

You’ll need to follow specific steps if you want to learn how to string the device properly so as to minimize or eliminate the chances of damage.

If you don’t have access to the user manual, then don’t worry; we’ll do our best to walk you through the entire process.

Why Choose An Echo Weed Eater?

The Echo brand produces a wide variety of different gardening products, but the newer versions are some of the most versatile.

If you’re looking for durable weed trimmers that are effective and can last for years to come, they are definitely worth it.

Aside from that, they include many extra replacement parts and accessories.

They are relatively affordable, and you’ll be able to repair any extra parts without much hassle.

If you’re looking for a relatively good weed eater, then we highly recommend the Echo GT-225 model.

The Echo GT-225 Model

Besides the simplistic design, the Echo GT-225 is an effective weed eater.

It includes many features that you wouldn’t usually see in others on the market.

Plus, it has a lightweight design that’s perfect for anyone to carry.

Here’s a quick overview of some of the stand-out benefits.

Features

This weed trimmer focuses on delivering a clean-cut edge.

It effectively powers through thick outdoor areas and won’t get clogged or stuck.

Restringing the device won’t be too complicated as it’s designed to be easy to replace parts.

The company has thought hard about line replacements, which is why they made it quick and easy.

Other models may have a powerful engine, but they can be hard to control.

The GT-225 packs power but also includes enhanced controls.

You’ll easily be able to maneuver the device and get a precise clean cut.

Plus, the device includes a number of improved features compared to older models.

It boasts a strong 50:1 ratio for fuel usage, which features a two-stroke cycle engine.

What’s more, every purchase includes a five-year warranty and a two-year commercial warranty.

You’d also enjoy the ergonomic design that’s curved and includes a custom handle, as well as a long cutting swath of 16-inches.

The curved shaft is 48-inches in total and makes for easy maneuvering.

Lastly, you would be amazed that the device starts up quickly, thanks to its I-30 starting system.

Pros:

  • Produces a clean finish
  • Rapid-loading
  • Easy to control
  • Starts up quickly
  • Has an ergonomic handle

Cons:

  • Does not come with a self-feeding head
  • Has a curved shaft

How to String a Echo Weed Eater

An Echo Weed Eater features a strong weed eater head that’s laced with a spool.

The string trimmer is often more reliable and more durable than other weed eaters.

However, the only downside is that, eventually, the string will wear out, and you’ll be tasked with having to replace the string.

Learning how to restring the device can be a bit complicated, but it’s necessary if you want to have an effective weed eater.

With broken string, the device may not be strong enough to cut grass or weeds.

That’s why you’ll need to learn the steps to replacing the spool design of an Echo Weed Eater.

1. Power Off the Device/Stand It Up

The Echo is a strong electrical device, which means that you’ll need to ensure that it’s turned off before you try to re-string it.

Unplugging the device can help prevent injury or damage.

You’ll know when the device is fully powered down when there’s no noise, and the operating switch is flipped off.

You’ll then want to put the device in a vertical position.

This will make stringing easier in the long run.

If you have someone else to help you, we recommend getting someone to hold the device.

We always recommend that anyone restringing the device should use non-slip rubber gloves.

Eye and ear protection are also recommended but not mandatory.

If you don’t have anyone to help you, we find that propping the weed eater between a chair and a wall can be effective as long as the device is upright, and you are at eye level with the holes.

Just be sure that the device is completely powered off before you begin to loop the string through the hole.

2. Clean the Device

The second step you’ll need to take when restringing a weed eater is to clean it.

Place the weed eater on a flat surface or worktable.

From there, wipe it down and clean off as much dirt and grime as possible.

It’s recommended to use a towel, as it will be the most effective at getting into the crevasse of the device.

Removing dirt around the head and the string can make the replacement go smoother.

Plus, a build-up of grime can actually cause the device to function worse.

3. Remove the Spool from the Head

The next step is to remove the spool from the head.

The head of the device will have the string looped through two endings vertical to each other.

To remove this, you’ll need to push the string through the ends.

This will help loosen the string and get it to come undone.

Once you feel like the spool is starting to loosen up, you can carefully pull the string from one end of the hole to the other.

After that, you can move on to learning how to replace the spool from the head.

4. Replace the Spool/String

Due to the updated design of the line cutting spool, it will be easy to replace the string.

Start by inserting a 0.080-inch cross-fire nylon line into one of the outside holes.

From there, push the string until it’s come through the other end.

You may have to try it a few times before it actually works.

Using a 0.080-inch string or 0.095-inch line is the best, but some people have also used 0.115-inch lines.

Once you’ve pushed the line partially through, you can pull on it until it enters the recess of the weed eater.

There should be at least two to three feet of wire on each end.

5. Pull the String Through

Once you’ve got it through both ends, then you’re officially done with restringing the device.

The Echo GT-225 is extremely easy to restring, and you won’t have to deal with removing parts.

As long as you have the right string type, then the process should only take you 10 to 15 minutes.

Make sure that you pull at least a few feet of string through each side.

Once you’ve done that, you’ll be able to string the device entirely by rotating the head in a counterclockwise motion.

This will cause the string to go into the head and be looped around the inside of the device.

6. Rescrew the Head

Take the head of the weed eater and rotate it counterclockwise until the string is all the way through.

There should be just enough string out of the sides shorter than the shield guard width.

From there, you’re all set, and you can test out the device.

how to string a echo weed eater

Are You Still Confused About Replacing A Weed Eater Head?

If you’re still struggling with restringing the device, then a demonstration video may help.

Here’s just one video example that can help you restring your device.

As you can see, restringing the device requires minimal effort.

The gas-line trimmer also features quicker installation times than others on the market.

Using the correct tools can also help speed up the process.

Troubleshooting the Echo GT-225

While the Echo GT-225 does promise to be a hassle-free device, things can still go wrong.

If you’ve experienced problems with restringing, we can help give you guidance on a few common issues.

Here are the most frequent ones that we’ve found:

Not Stringing Correct String Type/Size

The GT-225’s recommended string type is nylon, and the size is 0.080 in diameter.

We’ve found that the Cross-Fire brand is the most compatible with the weed eater, but we’ve also seen other gardeners use other size strings.

If you experience issues with strings, one problem that may be occurring is that the holes in the head may be too big.

Over time, the device can start to chip away at the holes, and the string may become too loose.

You’ll notice this problem if you’ve restrung the device and found that the string seems to slip back into the head.

To fix this problem, you can invest in the Crossfire nylon line up to 0.115 in diameter.

We don’t recommend using anything thicker than this as it can clog the device up and cause issues in the long run.

Not Stringing Enough String

When you purchase a string, you won’t be using the whole spool.

It’s best to give at least two feet of string on each side of the device.

However, we often see people use too much or too little string.

This can cause problems in the long run and render the device to be less effective.

How would you even notice if there’s not enough string?

The string may be too short and won’t be cutting the grass or weeds close enough to the edge.

You will notice this if you’re going for precision.

If there’s too much string, then you’ll notice that the edge of the trimmer will start to get clogged and won’t cut any of the grass.

Not Replacing String Frequently 

There are many factors that go into how often you need to replace the string.

We’ve found that it’s best to tell if the grass is starting to look a bit dull.

The string will start to thin down and often times fail to cut the grass.

At this point, you’ll want to restring the device.

As a general guide, you should replace the string every half a year.

If you use the equipment frequently, you may have to replace it every few weeks.

Alternatively, you can also invest in a different head type.

The Echo features an extensive range of attachments and accessories that make lawn maintenance hassle-free and straightforward.

One of the most significant advantages of the Echo GT-225 is that it’s compatible with curved shaft trimmer heads.

The heads can store up to 20 feet of string at once and won’t need to be replaced as frequently.

While this can be a good thing, it’s more challenging to restring and require you to purchase a more substantial amount of string at once.

However, in the long run, we find this to be effective for those who don’t want to restring the device frequently.

Would We Recommend the GT-225?

Compared to the older models, we find that the GT-225 is much easier to manage.

There are many positive reviews online, and the most recent model is known to have a more powerful engine than many other older models.

This is likely due to the new engine.

The extra accessories and simplified head design also make maintaining the device easy.

As for restringing, you’ll find that it’s much easier to replace the string in the GT-225 than their previous models.

You won’t have to mess with extra tools, including screwdrivers or knots and bolts.

Plus, the weight of the device is designed to be easier to lift and use, which makes getting a precise trim easier.

Overall, we’d say that we’d highly recommend this if you’re looking for a powerful yet manageable unit.

Conclusion

Learning how to string a Echo weed eater can be difficult if you’re not sure what to look for.

Thanks to GT-225’s upgraded design, you won’t need to take the whole unit apart.

Instead, all you’ll need to do is loop the nylon string through the two holes.

If you run into any issues, Echo customer support can help walk you through the restringing process.

Aside from that, the model comes with up to five years covered warranty.

This ensures that you’re getting a unit that will last and won’t break down on you anytime soon.

Hopefully, we’ve helped you discover how to restring a weed eater.

honda 4 stroke trimmer problems

Fixing Common Honda 4 Stroke Trimmer Problems

How to , Weed Eater Tips & Tricks , Weed Eaters

We understand that it can get frustrating trying to troubleshoot problems with your stroke trimmer.

Honda is known for producing high-quality trimmers, but there’s always a risk of issues occurring.

If you’d rather not invest in replacing or repairing parts, then you can try to troubleshoot the problems yourself.

While the Honda 4-Stroke Trimmer is explicitly designed to be used by professional landscapers, frequent use can cause issues where the device may stop working.

Below, we will teach you how to troubleshoot Honda 4 Stroke Trimmer problems.

Common Honda 4 Stroke Trimmer Problems

The Honda 4-Stroke Trimmer is known to require minimal maintenance and last for years to come.

However, there are a few common issues we see happen with these devices.

The trimmers may be designed to last through the toughest jobs, but they will still run into problems.

There are a few common ones that we find that happen frequently.

First, the engine may start to develop problems.

Secondly, the trimmer itself may begin to wear down or need replacements.

Before You Start

To ensure that you’ve spotted the problem, we’ve come up with a guide that you can follow.

Before you begin, though, we have some reminders that we want you to keep in mind.

1. Prioritize Your Safety

The first step to troubleshooting your trimmer is to identify if there are any safety hazards; you don’t want to hurt yourself, others around you, or damage the product.

Trimmers are pieces of equipment that are prone to becoming dangerous if not correctly handled.

We find that putting on safety gloves, goggles, and headphones can help prevent any risks.

After that, you’re going to want to make sure that the device itself is entirely powered down.

To do so, you’ll want to place the equipment on a flat surface and switch the on/off button off.

The engine will need at least 10 to 20 minutes to cool down, so if you’ve used it recently, we recommend letting it sit there until it cools down.

After that, you can start to diagnose the problems with the device.

2. Read the Instruction Manual

Honda is known to produce high-quality machines that generally won’t have any issues, but sometimes, it does happen, and the company is aware of a few of these problems.

For that reason, the user manual has a small section that lists quick fixes to these problems.

Highlighted in the guide are common solutions like repairs, cleaning, and conditions to check every few months.

The equipment may be prone to these problems if maintenance isn’t kept.

Common Problems With the Honda 4-Stroke Trimmer

The best way to ensure the device does not develop any issues is by going through the different diagnostic issues highlighted in the user manual.

However, if and when you do encounter issues, here are possible tricks and tips that may help you out:

1. Engine Not Starting

The most common issue we were able to find with the Honda 4-Stroke Trimmer is that the engine will refuse to start.

With the Honda HHT35SUKAT and UMC435 LAAT models, the engine stops working if the tank is emptied of gasoline.

An easy fix to this problem is to drain the remaining gasoline from the tank and replace it with new gas.

The trimmer will start to work once it’s been filled up again.

Engine stability can vary if the gasoline is running low, so even if there’s a bit left, you may still need to drain and replace any remaining gasoline.

Always remember to drain the gas beforehand; similarly to your car, it’s not a good idea to mix gasoline types or mix old and new gas.

To avoid any problems, we highly recommend that you fully drain the tank and allow it to dry.

Another issue with the engine that we’ve found to be common is that the switch may not be working correctly.

With the newer models, the switch may appear to be in the “On” position, but may actually be stuck.

Switching the spark plug or fuel filter may help fix this problem.

2. No Power in System

Another frequent issue that we tend to come across is that the engine will lose power.

You can quickly identify this issue if you notice that the engine speed isn’t increasing.

Out of all the problems, this is an easy fix.

The filter needs to be either cleaned or replaced with new ones.

Here’s how to clean a filter (given that the filter is washable):

  • Take the filter out of the device.
  • Scrub it down gently with a mild detergent.
  • Allow the filter to dry.
  • Place the filter back into the slot and test.

3. Broken Spark Arrester or Throttle Cable

One of the other major issues we’ve seen is either a broken spark arrestor or throttle cable.

The problem here is that these parts are generally more expensive to purchase and install rather than to get a new machine.

We only recommend purchasing a full OEM Honda replacement part if you find it necessary.

4. Line Head Turns Continuously

The cutting head may get stuck on a loop and continuously turn.

If this is the problem with your device, then you will need to contact support.

There’s currently no fix for this other than either replacing the unit or replacing specific parts.

These parts are either the throttle cable or clutch that becomes damaged.

Sadly, the company doesn’t sell these replacement parts, and Honda doesn’t do well with other pieces you can find online.

Hence, you’ll need to send it in if you see any damages to these areas.

5. Too Many Vibrations

One of the fatal issues with any trimmer is if it starts to produce too many vibrations.

Vibrations are generally an indication of loose parts.

The sooner you identify these issues, the better.

We’d recommend taking the unit apart and tightening the loose parts.

To do this, you’ll need a tool kit with adequate screwdriver sizes and extra drill bits.

Other issues with vibrations can be from loose blades.

If you’re going to adjust the blades, always use thick work gloves.

6. Clean Old or Dirty Parts

Other minor issues that you may run into will have to do with the condition of the device.

If you’re not keeping up with cleaning the machine, then it’s easy for it to become clogged.

Common places for the dirt and grass to build up are near the blade, head, and protective shield.

Wiping down the device after every use can help prevent a buildup of grime.

7. String Getting Clogged

If you’re not used to feeding the spool through a trimmer, then the string can get caught.

To fix this issue, you’ll need a new spool of string.

Honda 4-Stroke Trimmers come with string already attached but may require replacements.

You can purchase extra string suitable for the device from the Honda website.

To restring a Honda trimmer, check out the step-by-step guide in this video.

8. Look for Loose Attachments

The last and final fix you can try is loose attachments.

Honda provides many different types of attachments.

These enable the device to be used for a large amount of landscaping.

However, this also means that attachments break or can be attached wrong.

Most of the attachments come with a locking system, so to ensure that it’s correctly attached, you should join the lock into place.

When you hear an audible click, that’s when you know the attachment is in place.

honda 4 stroke trimmer problems

Best Honda 4-Stroke Trimmers

Honda generally produces very durable and stable devices.

If you’re running into serious issues with the trimmer, then we don’t recommend fixing it yourself.

Common problems, like the ones we’ve listed above, may be corrected without help due to only requiring a bit of knowledge.

However, the more significant issues, such as replacing parts or adjusting inner compartments, should be saved for customer support.

Honda features extended warranties that can last up to five years.

Due to this, it may be more cost-efficient to send the device in rather than fixing it yourself.

Some models are designed with safety features, but even then, that doesn’t mean that issues won’t occur.

If you’re looking for a Honda 4-stroke trimmer to add to your arsenal, we’ve got just the right options for you.

1. Honda UMC435LAAT

The Honda UMC435LAAT is one of the more recent models of trimmers that are specifically designed for commercial and residential use.

With an upgraded engine, extra safety features, and multiple attachments, there’s not much reason not to get the device.

Features

Here’s a quick overview of some of the features:

  • Upgraded 4-Stroke Engine

This engine boasts a powerful start system that cuts down on start-up time.

  • Unleaded Gas Compatibility

The Honda UMC435LAAT uses unleaded gas, so there’s no need to take the time to mix gas and oil together.

This cuts down on how often you’ll need to replace the oil.

  • Quick Acceleration

This machine is designed with heavy torque and rapid acceleration.

This feature helps the unit effectively be used on thick grass, heavy brush, or dense outdoor areas.

The strong torque also enables enhanced throttle and extends fuel efficiency.

  • Ergonomic Design

The handle is designed to be U-shaped and fit comfortably in your hand.

This helps enable you to use the device for extended periods without hand cramping.

Plus, it will increase your control and allow you precision while trimming.

  • Ultra-Quiet Operation

The unit features a two-lined head that makes it have quiet operation.

This means that the noise level is reduced, and you can use it without earmuffs.

  • Lower Vibration

The engine is designed to produce lower vibrations.

With this unique advanced system, the engine clutch is less likely to develop issues over time.

This includes a better location of the engine clutch that’s located further from the operator.

  • Limited Lifetime Warranty

Another massive benefit of the Honda 4-Stroke Trimmer is that it comes with a limited lifetime warranty.

The warranty covers any issues with compartments and performance.

If any of the parts fail, you will be able to contact their support line to help get the unit fixed.

Plus, the limited lifetime warranty includes repairs.

Pros:

  • Multiple varieties of attachments
  • Runs on unleaded gas
  • Enhanced safety
  • Quiet operation

Cons:

  • A bit heavy

2. Honda HHT35SUKAT Honda Trimmers/Brush Cutters

The Honda HHT35SUKA is one of the newer models of trimmers designed for multiple outdoor jobs.

It features an extensive range of attachments, which can help you do anything from clearing saplings or small trees to regular trimming or clearing brush.

Features

Here's a quick overview of some of the features:

  • Quick Acceleration

This trimmer features a four-stroke engine that speeds up acceleration and torque.

There's also the increased throttle, which helps keep up with demanding jobs.

  • Bike Handle Design

This machine features a specialized "U" shaped handle design, which makes it more comfortable to operate.

The U-shape handle also helps provide enhanced control and precision.

  • Unleaded Gas Compatibility

This engine is compatible with unleaded gas.

Overall, this will decrease the frequency of how often you'll need to replace the oil.

  • Less Smoke and Oil

The engine won't burn out like two-stroke engines, so there will be less smoke.

  • Lower Vibrations

The engine produces fewer vibrations on the system.

Due to this, the engine clutch housing system won't burn out as quickly.

This allows you to use the trimmer while minimizing operator fatigue.

  • Ultra Quiet Design

The loader head is designed to be quiet and reduce overall noise.

  • 360-Degree Incline Engine

Lastly, the engine can be stored in any position.

This means that you can store and repair it at any angle.

Pros:

  • Runs on unleaded gas
  • Powerful enough for demanding jobs
  • Fuel efficient design
  • Adaptable trimming
  • Comfortable to hold for extended periods

Cons:

  • Burns through the line quickly
  • Bulky

Are There Any Limitations to a Honda 4-Stroker Trimmer?

The only issue we were able to find with the design is that the string may come unattached and that the unit itself is bulkier than other models.

However, we don’t see these flaws as being a reason not to invest in one.

Overall, the quality is much higher than other brands, and the durability has the strength to last through weekly use.

This type of machine can be heavy, but the ergonomic handle helps reduce strain on your wrists and hand.

The heavy-duty engine also can power through most jobs in less time than other trimmers.

In the long run, the weight won’t really matter unless you’re using the machine for extended hours or can’t put weight on your back.

Conclusion

While the Honda 4-Stroke Trimmer is one of the best trimmers on the market, it is prone to a few issues.

Still, these issues are outweighed by the positives of using the system.

Learning how to troubleshoot common Honda 4 Stroke Trimmer problems can help save you time and money.

However, if you tend to find more serious issues, we recommend contacting Honda support or repair service.

These services include replacement parts and have the necessary tools to fix any problems with spare parts.

Although, if there are significant issues with the device that look like they can’t be fixed, we recommend replacing the system.

It can be dangerous repairing if parts break or crack.

how to install ryobi bump feed trimmer head

How to Install Ryobi Bump Feed Trimmer Heads: A Guide

How to , Weed Eater Tips & Tricks , Weed Eaters

Maintaining the appearance of lawns and yards may only be a hobby to some, but to others, it is a must.

Every family should know how to install Ryobi bump feed trimmer heads, which is one of the best weed eaters in the market.

Lawns are quite challenging to maintain when it covers an unusually large piece of your home, especially when weeds have grown out of your lawn.

It will make your yard look dirty and unorganized, as well as can become the habitat of new pests.

What Is a Weed Eater?

A weed eater is also commonly known as a “string trimmer”, and it is something necessary for families who want to maintain their lawns.

It is a good investment for clearing out the weeds in your area and maintaining the appearance of your yard.

They do an effective job since weed eaters usually can trim a whole yard for about six hours.

It can also help the elderly with any back problems.

There are different types of weed eaters, depending on what you may need, but the basic principle of a weed eater is to let the string spin fast enough from a center to cut specific materials, like grasses.

Various materials are being used to serve as the “string” in weed eaters, although the most common one is stiff nylon because it stands out on its own and is very light in weight.

The Ryobi Weed Trimmer

The Ryobi Weed Trimmer is one of the best weed trimmers out there with the most effective work, yet the most affordable.

It is an excellent buy with its 26cc engine with low emission and two cycles.

The Ryobi Weed Trimmer boasts its one horsepower accompanied by two, piston rings as its main feature for overall maximum increase in power, which makes work easier and faster.

It also gives users the chance to change trimmers when inappropriate attachment is used.

Thus, you can use some other attachments when you only want to trim the bushes around.

With the use of two-cycle gas, you can minimize emissions, which is good not only for everyone’s health but also for the environment.

Although it can reduce your work time in more than half, depending on the amount of weed you are about to cut, it still maintains the same efficiency to spend more time doing other valuable things.

Advantages

Every lawn area can be covered in about 10 hours, so you will have more time to do other things like gardening or any recreational activities.

It also has a StartEasy flip button where you do not need to pull it much to open its engine.

The product also has a detachable head, so you can use other attachments that you need.

This convenience allows the weed trimmer to become a bush cutter whenever you need it to.

The attachments from other companies are also compatible for use.

Lastly, since it is a two-cycle engine, it has simpler parts, easier to maintain and store, and has less vibration since it has two engines.

Disadvantages

The only downside of using the Ryobi Weed Trimmer is that you have to tolerate its loud noise during operation.

That said, it has a loud noise since it contains a very good engine to sustain its quality.

The fuel economy of the two-cycle Ryobi Weed Trimmer is not that efficient as compared to a four-cycle engine.

When it comes to gas emissions, the Ryobi Weed Trimmer burns oil to be used as its fuel.

Why Should You Buy the Ryobi Weed Trimmer?

The product has a more efficient capability as compared to the other weed trimmers out there in the market.

Even though the Ryobi Weed Trimmer has a loud engine, the quality of work done is way ahead of its other competitors.

The detachable unit head makes it easier to use the Ryobi Weed Trimmer in comparison with other weed trimmers out there.

How to Install Ryobi Bump Feed Trimmer Heads

Ryobi Products is a company famous for their lawn equipment made from gasoline.

One of its famous products includes a complete line of string trimmers.

If the cutting attachment attached to your trimmer has been broken or worn out, owners should remove and replace them; this will only take a few steps and a few minutes.

The bump head spring provides the tension to the bump head knob.

It is done to return the head knob to its proper position after it makes contact with the ground to feed more line.

This spring can get weak through time.

When this happens, the bump head trimmer may feed lines inconsistently, and the bump head spring should be changed immediately and probably a new bump feed head.

how to install ryobi bump feed trimmer head

Here are the steps that you need to take to install a Ryobi Bump Feed Header:

1. Invert the Trimmer

With the Ryobi Weed Trimmer upside down, you can now see the bottom of the lawn tool.

This was done to place the cutting head at the top and in front of you so you can examine the bottom part of the Ryobi Weed Trimmer, where you will install the feed header.

2. Loosen the Bump Head

Loosen the bump head or bump knot by unscrewing it in a counter-clockwise motion to avoid having a loose thread on the screw ridges.

If it shows more resistance, use pliers for more grip and leverage, as well as avoid any unnecessary injuries that may be due to forced pulling.

You should now be able to remove the bump head or bump knot and keep it somewhere safe.

3. Remove Inner Spring Reel

After temporarily removing the bump head, remove the inner string reel from the innermost part of the cutting head and keep it in a safe place.

Avoid breaking or misplacing this inner reel spring to avoid any mishaps.

At this point, you can now see the lower part of the engine shaft.

4. Grasp the Shaft Housing

After you have seen the lower section of the engine shaft, using your non-dominant hand, grasp the shaft housing firmly.

Then using your dominant hand, shake off the cutting hand while gently pulling it out upwards.

Continue making this motion until the cutting head slips off the large hex nut it is on.

5. Replace Cutting Head

Attach the new cutting head to the large hex nut.

Gently press, then return the shaft housing in place.

Make sure that the fitting is firm, and you might have to give a little extra effort in order to tighten the attachments.

That is to avoid any unexpected movements of the reattached shaft housing.

6. Add Spring Reel on the Housing Shaft

As mentioned, the inner spring reel should be attached in the innermost part of the housing shaft.

You will notice that the lower part of the engine shaft will now be hard to see if you have attached the spring reel properly in place.

Make sure that the spring reel is correctly placed on the housing shaft since it is one of the most important innermost parts of the housing shafts.

7. Tighten the Bump Head Back

You now have to return the bump head in place.

Use a clockwise motion to tighten the bump head, while being careful with the other parts.

You may use other tools, like pliers, to put it in place more easily.

That will also avoid any unnecessary muscle strains if you force yourself to do it by hand.

8. Run a Test

To make sure that the installation was successful and the weed trimmer is working properly after you have installed the head, try a little test run before using it on your lawn.

Depending on your ability to handle tools, the above steps can be done in just ten minutes, not wasting any time to start on your scheduled lawn trimming.

Conclusion

The ability to self maintain your lawn maintenance equipment is a must thing to have.

It would cost you a lot less than availing the services of a lawn company to fix their equipment.

If you can already fix your lawn maintenance equipment, then maybe you can also fix others’ instruments.

Step-by-step guidelines, just like the one from above, are beneficial to owners saving their money and are very easy to follow so that you can learn by yourself how to fix them properly.

Not only have you saved more from your savings, but also, you now have the edge of doing your own repairs and maybe the future repairs of others, too.

With the knowledge on how to install Ryobi Bump Feed Trimmer heads in mind, you can even teach your fellow neighbors on how to install the bump feed head of any trimmer properly without consulting the hardware store.

Maybe one day, you can start your own business regarding repairing parts of a weed trimmer and installing bump feed trimmer head.

Maintaining its other parts can also be a part of your business since it is also commonly handled by people who install bump feed trimmer head on weed trimmers.

>