How Much Torque Does An Air Impact Wrench Have

If you are looking to loosen or tighten bolts, then an impact wrench can help. But you will need to know the required torque beforehand. 

Today, there are multiple types of wrenches, and you can select between manual and electric ones. Some will come with a set torque, while you can adjust it in others. So, in this guide, I will tell you all about how much torque does an air impact wrench have? 

Dive in! 

How Much Torque Does An Air Impact Wrench Have 

Firstly, you need to know that there’s no standard torque measure for air impact wrenches that can be used. It will vary depending on the task at hand. If you use too little torque, then you will not get the desired results. 

The same goes for too much torque, which will also not give you favorable results. Hence, the first task while using a wrench is to understand the amount of power and torque required for the job. 

In general, an impact wrench will have a torque that can range between 300 and 2200 Nm. If you need to tighten big fasteners, then a higher level of torque is required. But if you want to work with rims and general installations, then a torque of 100 Nm should be sufficient. 

Aside from that, if you are working with lug nuts and want to remove them from car tires, then you will require around 350 ft-lbs of torque. On the other hand, if you are working on large-scale projects on construction sites, then you might need a torque of up to 700 ft-lbs. 

Can The Torque Be Controlled? 

Yes, you can control the torque with the help of an air regulator. The regulator can be attached to the end of the pressure line, or you can attach it to the wrench to adjust the airflow, which will help in regulating the torque. I will always recommend that you choose devices where the torque can be controlled. 

Final Words