I don’t really like DIY projects until they are easy to do.
And thankfully, I came across a few hassle-free ways to cover up the space between my newly installed backsplash above the kitchen cabinets. So, if you’re wondering “how to finish backsplash under cabinets?” then read on!
How To Finish Backsplash Under Cabinets?
To answer simply, I’d say use some silicone caulk to cover any empty space between the backsplash and cabinets. The biggest advantage of this technique is that it creates a waterproof seal, which prevents moisture from seeping into the surfaces and damaging them in any way.
However, you may choose to get a little creative and use other materials to fill in the space. So, here are some of my favorite options that may come to your rescue.
1. Copper Sheets
Copper sheets, albeit a bit expensive, are one of the best materials in terms of durability. They are typically available in 3 or 4 feet wide sheets and different lengths, so you can choose the right dimensions according to the space you need to cover.
Generally, the area between the cabinet and backsplash in most houses is between 12 and 18 inches and requires only a couple of these sheets. But no matter how many sheets you need, I’d strongly recommend going for acid-etched or textured variants, which can be easily installed using almost any construction glue.
Moreover, you can opt for a colored copper option to complement or contrast the tiles and cabinets. And don’t forget to make cutouts for the outlets and fixtures with tin snips or shears.
2. Tin Sheets
You can also fill in the space above the backsplash and between the cabinets with patterned tin sheets. They can be installed the same way as copper sheets and are typically wide enough to cover the space in one go.
Some people prefer using wood molding for reinforced strength and paint over it to achieve a clean look. And you will be happy to know that the sheets can be easily cleaned with soap and water.
3. Beaded Board
Beaded boards, especially the painted ones, work well with painted or colored cabinets to render an old-school charm to the place. If you go for this option, then I’d suggest using a combination of adhesive and countersunk nails that have a wooden putty covering.
Finish off by painting the backsplash with a glossy or semi-glossy coating to prevent the accumulation of dirt and moisture.
4. Molding
After you have sealed the space between the backsplash and the cabinet, consider using molding above the former to firmly secure any gap between the edge of the tiles and the wall. Doing this will prevent the entry of moisture behind the backsplash, and you can use only a few nails to successfully install the molding.
Furthermore, you can hide the nail heads by painting them with a color that compliments the color of the backsplash or the cabinets.
Final Words
That’s all I had for you today.
But before I leave you to the job, here’s a small tip: install the tiles in a way that they sit at least ⅛ inches above the countertop or the cabinets. This space is necessary to make room for any natural changes to the foundation of the building.
I’ll see you another day. Take care!