Installing a new cabinet in the kitchen is undoubtedly a daunting task that requires a lot of planning, money, and effort.
And there’s no better way than measuring your kitchen space in linear feet, which gives you a rough idea of the materials, workforce, and money required for the project. So, if you’re wondering how to measure kitchen cabinets in linear feet, but don’t know how to go about it, then this guide is for you.
Keep reading!
What Is Linear Feet?
Ideally, a linear foot is a 12-inches long measurement taken in a straight line. Through linear feet, you will only be able to measure the length of your space and nothing else.
Speaking of kitchen cabinets, you can measure the space in your kitchen through this method and find out how much materials are needed to pull off the task. Though it may sound tricky, it is much easier than finding square footage.
How To Measure Kitchen Cabinets In Linear Feet
When calculating linear footage, make sure you get a notepad, draw a rough sketch of your design, and jot down measurements for reference. Here’s how you can measure linear feet for kitchen cabinets.
Step 1: Measure The Length Of The Walls
To begin with, measure the length of the walls where you plan to install the cabinet in a straight line. Write the dimensions on the paper where you have drawn a rough sketch of the space, and don’t forget the openings of windows and doors.
Those planning to install both upper and lower cabinets will have to measure twice using the same procedure. To be safe, I recommend you draw a separate sketch for both of them.
Step 2: Measure The Second Wall
More often than not, homeowners prefer going for cabinets of L shape. So, if you’re planning to install them in the same way, you will have to measure the second wall from one corner to the other.
Step 3: Measure The Additional Walls
At times, kitchen cabinets are joined together by overlapping. In such cases, homeowners will have to subtract 24 inches from the second side to allow overlapping and find the average length of your cabinet.
Step 4: Appliance Allowance
If you’re planning to install appliances, then subtract the width of freestanding appliances. Generally, 30 inches is the standard width for installing appliances, so you can deduct it from the measurements.
Step 5: Calculate Linear Foot
Now that you’ve got the numbers on the notepad, add them and divide the total by 12 inches. And you’re done!
Summing It Up
Whether you’re installing a new cabinet or remodeling the entire kitchen, it’s always wise to measure the space in linear feet before starting the project.
Once you get a fair idea of the dimensions, you can pull off kitchen remodeling in a breeze. However, if you find all this too overwhelming, don’t hesitate to call a professional.
On that note, it’s finally time to wrap up my guide on the topic. Hopefully, I was able to answer your question and clear your doubts regarding the same.
Good luck and best wishes!