Having a master suite is essential to a comfortable lifestyle, adding a touch of luxury to your home.
Though most people prefer a unified master suite that flows seamlessly from the bedroom to the bathroom, some wish to separate the two from each other. So, if you fall into the latter category, and are wondering how to separate bathroom vanity from master bedroom, then you’ve dropped by at the right place.
Read on to know more!
How To Separate Bathroom Vanity From Master Bedroom
Not to deny, bathroom vanities aren’t only functional, but they also spruce up the décor of your space. But, of course, when you’re sleeping, and your partner is getting ready, the vanity light can cause a disturbance. Thankfully, you can separate your master bedroom from the bathroom by creating a doorway between the two.
Installing A Doorway
Here’s a step-by-step guide to creating a wall or doorway to separate your vanity from your bedroom.
Step 1: Grab The Supplies
Having the right supplies will let you carry out the task quickly, and you’ll also be safe from making a couple of trips to the garden shed. Besides the toolbox, wood filler, spackle, caulk for crown molding, and trim are a few essential items that you must keep by your side while working on the project.
Step 2: Measure The Space And Construct The Frame
The next step is to measure the space to create a doorway to build an accurate frame. If you make errors in the measurement, all your efforts, time, and, of course, money will go in vain.
Step 3: Secure Them In Place
As soon as your frame is ready, you’ll have to start mounting it to the space. But before that, you’ll have to install a header board and drywall to carry the load of the door.
Step 4: Install The Trim
After the drywall dries, paint the wall to match it with the décor of your space and install the trim. And for this, I suggest using pre-primed boards that you can get from a local home improvement store. Use 2” brad nails to install the trim in the space.
Step 5: Add Finishing Touches
Now you’ll have to give finishing touches to the trim by filling nail holes and seams with wood filler. Later, scrape the larger dry bits, sand them quickly and repeat the process.
Step 6: Caulk The Trim
After sanding, caulk the trim in the seams both inside and outside. Here’s a pro tip - use an old gift card to smooth out the caulk bead and wipe the area with a damp paper towel.
When all is said and done, roll on a few coats of paint, edge it in, and your new master suite is ready!
Final Words
Now that you know how to separate the bathroom vanity from the main bedroom, I’m sure you won’t face any issues and will pull off the task in a jiffy.
On that note, I’ll sign off for the day. But before that, here’s a last piece of advice - if you’re not confident in your DIY skills, don’t hesitate to contact a professional. Good luck!