Choosing the best filtration system for your pool involves taking plenty of factors into account, which involves knowing the distinctions between different systems.
Pool filters are an essential component of pool circulatory systems, as they trap debris and keep the pool conducive for you and your swimming hobby. Different filters use different media to accomplish the task, each having its advantages and disadvantages that are important to know in order to make the most from them.
Sand filters vs. Cartridge filters – Comparison table
Sand filters
Cartridge filters
Smallest particles it can filter out
20 microns
10 microns
Media it uses
Silica sand
Cartridge
Time it can work before replacement
Between 5 and 10 years
Between 1 and 3 years
Sand vs. Cartridge filters – How they compare
https://www.youtube.com/watch?v=BKdqURBOL9A
The only difference between these two are the filtration media they use – sand filters use silica sand, while cartridge filters use cartridge layer systems.
Sand filters are a large globe structure that you fill with ‘filter’ sand – silica sand, in other terms. You then pass the water through it. They are quite economical, as they can last between 5 to 10 years before you need to change them.
To maintain them, you will need to ‘backwash’ the system, which involves removing the dirt and particles that are in the sand, since the pressure begins to increase over time as the sand traps more particles.
On the other hand, a cartridge filter will come in form of a 2-piece tank with a bottom and lid, and a cartridge is within the tank. It cleans the water by pushing it from your pump and guiding it through a membrane in the cartridge. The level of maintenance it needs is very low, and you will only need to clean the cartridge if the pressure is 10 Psi above the usual reading it posts – you will also not need to do backwashing, and the cartridge lasts between 1 and 3 years before replacement.
Gas vs. Cartridge filters – A comparison review
Sand filters
Pros
Very easy to use
Very low maintenance
Quite affordable
It can remove small dirt and debris, measuring 20 to 40 microns at least
Lower initial costs
Backwashing is very easy to do on your own
Cons
It cannot filter particles smaller than 20 microns
Needs a sand change every 5 to 8 years
Backwashing reduces the pool water
Cartridge filters
Pros
Removes very minute particles
Lower pressures lead to lower energy costs
Does not impact water chemistry
Easy maintenance schedule
Cons
You will need to filter and wash cartridges
You will need to replace them every 1 to 3 years
Impractical for large pools
Higher maintenance and purchase costs
Verdict: So, what is the winner? Gas or Cartridge filters?
Overall, the cartridge filter is the best option as it filters more content despite the higher initial cost, but it will work best if your pool is smaller.
FAQs
Do pool filters clean up my swimming pool?
Contrary to popular belief, no they do not clean the pool. Their purpose is to trap dirt and particles in the water, which reduces the particles floating out and keep the pool looking attractive.
Pressure cookers have become kitchen staples for many, promising speedy meals without compromising flavor. But have you ever wondered how hot does a pressure cooker get? Understanding the temperature inside this culinary marvel is more than just kitchen trivia. It’s a vital aspect of safe and efficient cooking. From unlocking the secrets of rapid cooking
Pressure cookers have evolved into indispensable allies in modern kitchens, capable of conjuring quick, mouthwatering meals with ease. Yet, amidst the kitchen whirlwind, there’s a familiar culinary stumbling block that can swiftly transform your gastronomic aspirations into a culinary catastrophe. Yes, we’re talking the menacing issue of pressure cooker burn marks on the bottom. Few