Mostly used in bathrooms, pull cord strings are pretty helpful in switching the light on and off without fearing electrocution.
While they are easy to use, changing or replacing them can be pretty challenging. And if you are wondering how to change a pull cord string, read this guide to clear all your doubts. So, without any more delay, let’s dive right in!
Remember, electricity can be dangerous, and you need to be very cautious when trying to replace a pull cord string. So, before you can go anywhere near the light switch, make sure that you turn off the main power supply.
Once you have successfully switched off the power, slowly remove the cover to understand the kind of switches that you have. In case there are screws, you have to take them out before removing the cap.
With the help of a screwdriver, remove the screws that are holding the string in place. But while you are at it, make sure that you do not loosen the screws too much, as that might make them fall out. And if you have a twist cover, keep twisting it anti-clockwise to help release it. I would suggest that you take a picture of the assembly, as that will come in handy later.
Just like any other DIY project, changing a pull cord string also requires the right tools and material. And keeping them handy will save a lot of time. The essential tools that you will need here are:
Once you are done unscrewing, take the new switch and put the wires through the base of the structure. After you have successfully put the new cord through the base, it is time to screw the frame back to the ceiling, which is where the reference picture might come to use.
Take a look at the image, and try reconnecting the wires accordingly. After you are confident that they are in place, tighten the screws to hold the wire in place. In case you are using an earth wire, I would suggest that you put a sleeve on it before connecting to the base plate.
With that, I have reached the end of this informative guide. I hope that after reading this, you will be able to take on this DIY project and finish it with ease.
Keep in mind, when you are working with electricity, safety is of primary importance. So, never downplay the importance of a voltage tester to stay out of danger. Likewise, ensure that there isn’t too much water on the bathroom floors or walls.
And to stay updated on more ‘How-To’ DIY tips, do not forget to keep an eye out on this space. Until next time, adios!
Tags
Pressure cookers have become kitchen staples for many, promising speedy meals without compromising flavor. But have you ever wondered how hot does a pressure cooker get?Understanding the temperature inside this culinary marvel is more than just kitchen trivia. It’s a vital aspect of safe and efficient cooking.From unlocking the secrets of rapid cooking to ensuring
Read MorePressure cookers have evolved into indispensable allies in modern kitchens, capable of conjuring quick, mouthwatering meals with ease.Yet, amidst the kitchen whirlwind, there’s a familiar culinary stumbling block that can swiftly transform your gastronomic aspirations into a culinary catastrophe. Yes, we’re talking the menacing issue of pressure cooker burn marks on the bottom.Few things are
Read More