How to Turn Light on Ariens Snowblower

Prefer completing the day’s snow-blowing work at dawn? Then you’ll need to know how to operate the headlights on your new Ariens snowblower. 

As mornings are usually overcast after a snowstorm, it’s essential to keep the headlight turned on to ensure proper visibility. However, turning on the light on an Ariens model can be confusing to new users. 

So, here’s a short guide on how to turn light on Ariens snowblower. 

Knowing The Headlights On Different Models

Irrespective of the snowblower brand you’re opting for, you can expect functional differences in its models based on their type and the product range they belong to. For instance, the latest snowblower from a brand may have the performance controls fixed on a different part compared to a much older model. 

That’s why it’s essential to be aware of the following variations in the headlights on Ariens snowblowers: 

• Some models have LED lights that are internally controlled 
• Others are operated using a simple push-button or switch at the back of the handlebar 

Turning On the Lights

Considering the above differences in the functioning of LED lights, you’ll have to determine whether the lights in your model can be manually controlled or not. 

In case they’re controlled as per the operations of the snowblower, the lights will turn on automatically when you start the machine. And as for other models, you’ll just have to press the switch or push button on the handlebar to turn them on. 

Replacing A Headlight

Like most of the other parts of a snowblower, you can’t rule out a malfunction of the headlights as a result of regular use for a couple of years. And it’s in these situations that you’ll need to get the lights replaced. 

To help with that, I’ve included this section with some simple steps you can follow to install replacement lights on your own: 

Step 1

First of all, remove the start key from the engine of the snowblower. You’ll also have to disconnect the wire harness of the snowblower to prevent any mishaps during work. 

Step 2

Now, rotate the existing light bulb assembly counterclockwise to detach it from the housing. 

Step 3

Take the new light bulb, and install it by aligning the tabs on the assembly with the slots in the bulb housing. Once the bulb is installed the right way, rotate it clockwise to lock it in place. 

Step 4

At this point, you’ll have to reconnect the wire harness to make the snowblower ready for use. 

Step 5

With the replacement installed, you can insert the start key into the engine slot to begin working with the snowblower. 

FAQs

Final Words

So, that was all about operating the lights on an Ariens snowblower to get the desired visibility throughout. As long as the machine is functioning efficiently and the lights are switched on, rest assured that the snow-blowing work will meet your expectations. 

But in case you’re having trouble locating the light, I’d suggest checking the user manual carefully for such details. See you next time!