Dealing with a weak soap pump is a minor inconvenience that can be solved in minutes and save you from getting frustrated.
I may not be the most qualified handyman, but the solutions I found on how to get a soap pump to work like new were surprisingly easy to do. So, to help you out, here are the most effective methods I found.
Let’s jump right in!
How To Get A Soap Pump To Work?
1. Eliminating Blockage
One of the most common causes of blockage in a soap pump is a buildup of soap in the pump. Thankfully, this also has a quick and easy solution.
First, unscrew the cap and take out the entire pump to wipe it clean. Once done, place the entirety of it under some warm water for five minutes to break down the soap inside. Even if it fails to fix the soap pump, this strategy will help you access the other parts of the assembly to find the root of the problem.
2. Spring Replacement
If possible, remove the pump from the bottle and check the spring of the mechanism. In most cases, this spring becomes worn and does not provide the proper bounce to get the soap up the pipe.
Remove the old spring and replace it with an identical one. Try to get it as close to the original as possible to get an efficient performance. Give it a few test pumps to get the soap through the pipe and back to the top of the nozzle.
3. Piping
Another possible source of blockage could be related to the pipe of the pump assembly. Kinks along the length of the tube or a shorter length can prevent the soap from coming out in the right amount and pressure.
While it may take more work, any plastic tubing from a hardware store should serve as a viable replacement option. Make sure the length of the opening is enough to accommodate the pump and reach the bottom of the bottle as well. Reassemble the entire soap pump, then run some hot water through it to remove any foreign elements in it, and it should be ready to go.
4. Replacing Broken Seal
If none of these methods work to get your soap pump working again, then it is highly likely that the problem is in the internal seals. In this case, it may make more sense to just get a new pump, as repairing or replacing involves more effort and time.
Final Words
Hopefully, you are now better equipped to deal with broken soap pumps no matter the reason behind.Â
Take the time to go through these methods from beginning to end and narrow down the possible sources of blockage. You will surely have a much more frustration-free daily life with these quick fixes at your disposal.Â
Patience is key, so give your soap pump the attention it deserves, and it will serve you for a long time to come.Â